NX Venom Switch

NX Venom
General
Author	CatcherITGF
Type	System Tools
Version	4.5.1
License	Mixed
Last Updated	2024/06/15
Links
Download
Website
Source

Switch overclocking suite for Nintendo Switch devices running Atmosphere CFW.

Included components:

• Atmosphere
• Hekate
• Sigpatches
• Switch OC Suite
• SaltyNX
• FPSLocker
• ReverseNX-RT
• InfoNX
• Uberhand-Overlay
• Status Monitor
• DBI
• Tinfoil
• AIO Switch Updater
• Lockpick RCM
• TegraExplorer
• Picofly Toolbox

Warning: Overclocking the console does not lead to irreversible consequences, however it poses a risk to data due to the features of Horizon OS. Therefore, it is strongly recommended to use overclocking exclusively in emuMMC and make backups. Use at your own risk.

Installation

Make backup and delete everything except "Nintendo" and "emuMMC" folders on the SD card.

Unpack the NX Venom to the root of the SD card. Use a card reader, or "Hekate" > "Tools" > "USB Tools".

Use the "All-in-One Switch Updater" homebrew application for updates.

Installation of additional software, as well as patches for games, is done through the "UberHand" menu (click right) > "Software Installer".

User guide

NX Venom usage.

Changelog

v4.5.1

• Updated Switchcraft to 1.3.1
  • GPU auto vmin fine tuning for lower speedos
• Fixed issue #8
  • Updated AMS system_settings.ini
  • Added AMS hosts domains for EmuMMC only
• Fixed issue #9
  • Updated Hekate to 1.6.2 v4
• Updated Sys-Patches to 1.5.2

v4.5.0

• Updated Atmosphère 1.7.1
• Updated hekate v6.2.0 & Nyx v1.6.2
• Updated Switchcraft to 1.3.0
  • AMS 1.7.1 compatible
  • GPU auto vmin fine tuning
  • Small tuning changes in erista CPU UV4 should improve stability on some switches
• Updated SC Wizard
  • SC 1.3.0 compatible
  • GPU tweaks moved to Wizard
  • GPU Scheduling & 1305 toggles separate now
• Udetated MGCL/MGCR 8GB patches
• Added sys-patch overlay to maintain sigpatches features

UPD1. Hotfix for Hekate (blue screen on Erista)
UPD2. Hotfix for Hekate (v3 build)
UPD3. Hotfix for AMS (re-uploaded payload and fusee files)

v4.4.7

• Updated OC Switchcraft 1.2.7
  • AUTO_ADJ_LV is now split into two modes
    • AUTO_ADJ_LV_HP: LV mode with slightly tighter timings
  • Additional erista CPU UV tunings UV 1-5
    • New UV1 = old UV1
    • New UV5 = old UV3
• Updated SC Wizard
  • Switchcraft 1.2.7 compatibility

v4.4.6

• Updated SC to 1.2.6.
  • AUTO_ADJ_2400 was renamed to AUTO_ADJ_LV; A DRAM mode with less tight timings; It can help to achieve higher frequencies or lower voltages.
  • Mariko perf with AUTO_ADJ_LV has been improved.
• Updated SC Wizard.
  • SC 1.2.6 compatibility.

v4.4.5

• Updated Switchcraft to 1.2.5.
  • New CPU UV 7 (UV6 high8 + voltage break at 1428 MHz).
  • Added an experimental DRAM timing option “AUTO_ADJ_2400” it can help to reach 2400 MHz on some bad binned switches.
• Updated SC Wizard.
  • Mariko Cpu High Min Volt range has been expanded.
  • Fix bug with colors in Vdd2.
  • Added SC 1.2.5 compatibility.
• Updated Sys-Clk-OC to 0525.
  • Voltage bug on erista is fixed.
• Updated AMS config.
  • Disable dmnt_cheats_enabled_by_default.
• Updated AIO config.
  • Unhide Firmwares tab.
  • Unhide Cheats tab.

v4.4.4

• Updated Switchcraft to 1.2.4.
  • Sleep mode fix for CPU UV 1-3 (Erista).
• Updated RAM patches for 8GB MGCL memory modules (not included to NX-Venom, only for modded consoles).
• UPD: Fixed GPU Scheduling option.

v4.4.3

• Update Sys-Clk to oc8 final3.
  • Reversenx sync now respects clock cappings.
  • Fixed issue of sys-clk not working on boot for some people.
  • Minor bug fixes and optimization.
  • Fixed auto cpu boost.
• Updated OC Switchcraft to 1.2.3.
  • GPU UV2 revised, should improve the stability of some switches (Erista).
  • GPU auto vmin fine tuning, improved accuracy for some speedos (Mariko).

v4.4.2

• Updated Switchcraft to 1.2.2 pre-release.
  • Erista GPU UV tables.
    • UV1 = Medel's GPU UV table with an offset of +30mV.
    • UV2 = Experimental dynamic high UV table.
    • UV3 = Static Custom Table.
• Update SC Wizard.
  • Unset changed to Auto for GPU Vmin.

v4.4.1

• Updated Switchcraft to 1.2.1 pre-release.
  • 1305 MHz is now only available if GPU Scheduling is ON (Mariko).
  • Added an additional DVB voltage step for (Erista).
  • CPU UV2&3 enables 2295 MHz (Erista).
• Updated SC Wizard.
  • Switchcraft 1.2.1 support.
• Updated System Tweaks.
  • Added GPU Scheduling option (default OFF).

v4.4.0

• Updated Uberhand to 2.2.5.
• GPU performance increased by ~5% for all frequencies.
• Updated System Installer.
  • Progress bar for installation operations.
• Updated System Tweaks.
  • Native toggles ON/OFF.
• Updated SC Wizard.
  • Slider for Speedo.
  • Extended memory freqs range to 3000mhz for Mariko.
  • Extended CPU boost clock to 2601mhz for Mariko.
  • Fixed lags when moving between menus.
• Updated Info-NX to 1.0.6 DEMILITARAIZED vers (created by Cooler3D).

Credits

Special thanks to meha, b0rd2dEAth, redraz, b3711, lineon, Ruslan, MasaGratoR, CtC, Efosamark, i3sey, Irene, khmm12, discord community NSwitch 60FPS Cheats & Mods and RetroNX for implementing individual components and help with this bundle.

Made with love by NX community, composed by Catcher in the grain field.

External links

• GitHub - https://github.com/CatcherITGF/NX-Venom