CalcEmu

DS85 R3 is a TI-85 Emulator for Nintendo DS. Original version by Milan Pikula. It requires a TI-85 rom to run.

Installation

Note: This application requires an authentic ROM image to run. The file should be named ti85.rom.

Download and extract file.

DLDI patch .nds file to the root directory of the card.

Copy the ROM image that you obtained ti85.rom to the root of your card (no subfolder).

If you want additional features, you may want to copy ti85.sna to the root as well.

It includes some ASM Games. After it has loaded, press Custom> F1 to get to the gamemenu.

Obtain a TI-85 rom:

Get a TI-85 calculator. Make or get linking cable (serial or parallel should work).

Download a rom dumper. Virtual TI (Windows) and TiLP (crossplatform) can both do this.

Follow instructions provided with rom dumper.

Use fixrom if you experienced corrupted ROM files, see the included README.fixrom (optional).

SAVE - Save current state to ti85.sna on your CF/SD card.
LOAD - Load current state from ti85.sna on your CF/SD card.
RESET - Do a full reset of the calculator in case it crashes.
SIZE - Toggle scaling from proportional to stretched.
REAL/FULL/freal - Switch between the emulation modes.
- REAL - Attempt to emulate at actual speed (this isn't quite perfect yet however).
- FULL - Emulate as fast as possible.
- freal - Emulate at actual speed, unless doing processing, then run at full speed.
SKIP/ALL - Toggle between skipping frames (faster, useful for graphing/calculation) and rendering all (for games).
- SEND - Read section below.

Method 1 Standard link emulation:

More likely to run out of RAM, but should be more compatible. Also this is required for apps with external levels.
From the home screen, click [2nd] [LINK] [F2]. The screen says Waiting and the busy indicator in top-right is spinning.
Tap SEND on the touchscreen. Use D-Pad to scroll through the files, and press A to send a file.
After it returns to the GUI, you can either:
- A - Send another file.
- B - Stop sending files (tap ON key a few times to stop transmitting).

Method 2 MagicLoad (TM):

Nice when it works. Similar to the archive on other TI models, it will load a game from your SD/CF card, run it, then save it back when it's done.
Make sure LOAD.85S is installed on your calculator, along with Usgard 1.5 (These are both pre-installed if you use the included save-state).
From the home screen, click [CUST] [F1].
- Use Arrows to select load on the list of apps (it may be the only one).
- Use ENTER or A to launch it. A file list will appear on the bottom screen.
- Use the D-Pad to scroll through the files, and press A to launch one.

D-Pad - Arrows

A - Enter

B - 2nd

X - F1

Y - Alpha

Start - Shows debug screen while held

Select - More

Start+Select - Reset (please be warned there is no confirmation, press ON after reset)

R - 2nd

L - Currently unused

R3 2007/07/30

R2 2006/10/15

R1 2006/10/11