Seno DS: Difference between revisions

Revision as of 01:13, 22 October 2021

Seno DS is a music live sequencer. It uses WAV samples or sounds recorded via the DS microphone.

8 Tracks , 8 Clips per track, 16 Slots (Pattern).
Track audio from WAVE samples or Microphone.
Track settings: Sample, Polyphone/Monophone/Trigger mode, ADSR envelope, LFO.
Transpose +/- 36 semitones (3 Octaves).
Maximum 16 Voices.
Clip records 12 notes per step with velocity.
Choose different musical scales, including Seno scale (A3-E5 Major), Ionic (C4), Chromatic (C4), Major pentatonic (C4), Minor pentatonic (C4), Arabic (C4).
Clip settings: lenght 1-16 steps, speed.
KAOS pads.
Live recording and arranging via Stylus.
BPM 40-240 and Swing.
Mixer with Distortion.
Loads WAVE files.
Loading/Saving of snapshots.
Memory saving sample managment.

Download and extract file, then copy .nds file to the memory card.

If you can't load Seno DS on your card try loaders like dsorganise or moonshell or the homebrewmenu loader from devkitpro.

Use any mono wav sample. Put the sounds in a directory with the name of seno1, seno2, seno3 and seno4.

These directories could be in a folder /nds/ or on the root of your sd-card.

It must not exceed 128 samples for each slot.

Uses Stylus.

Left/Right - Switch the screens

A - OK (in dialogs)

B - Cancel

X/Start - Start/stop of the sequencer

Y - Enable/disable visual effects

Up/Down - Transpose the track

Left/Right - Browse thru sub-pages, Left/right (in dialogs)

Tested on:

R4 SDHC (firmware 1.31)
TTDS (unofficial firmware 1.17a12)

Version 0.9.1 2010/01/11

Version 0.9.0 2009/12/24

@@ Line 6: / Line 6: @@
 | license     = Mixed
 | author      = a128
+| lastupdated = 2010/01/21
 | website     = http://a128.freeforums.org
 | download    = https://dlhb.gamebrew.org/dshomebrew/senods.7z