CalcEmu: Difference between revisions

DS85
DS85
General
Author	davr
Type	Math
Version	r3
License	Mixed
Last Updated	2007/07/31
Links
	Download
	Website

Latest revision as of 11:47, 20 August 2024

DS85 R3 is a TI-85 Emulator for Nintendo DS. Original version by Milan Pikula. It requires a TI-85 rom to run.

Installation

Note: This application requires an authentic ROM image to run. The file should be named ti85.rom.

Download and extract file.

DLDI patch .nds file to the root directory of the card.

Copy the ROM image that you obtained ti85.rom to the root of your card (no subfolder).

If you want additional features, you may want to copy ti85.sna to the root as well.

It includes some ASM Games. After it has loaded, press Custom> F1 to get to the gamemenu.

Obtain a TI-85 rom:

Get a TI-85 calculator. Make or get linking cable (serial or parallel should work).

Download a rom dumper. Virtual TI (Windows) and TiLP (crossplatform) can both do this.

Follow instructions provided with rom dumper.

Use fixrom if you experienced corrupted ROM files, see the included README.fixrom (optional).

User guide

GUI buttons

SAVE - Save current state to ti85.sna on your CF/SD card.
LOAD - Load current state from ti85.sna on your CF/SD card.
RESET - Do a full reset of the calculator in case it crashes.
SIZE - Toggle scaling from proportional to stretched.
REAL/FULL/freal - Switch between the emulation modes.
- REAL - Attempt to emulate at actual speed (this isn't quite perfect yet however).
- FULL - Emulate as fast as possible.
- freal - Emulate at actual speed, unless doing processing, then run at full speed.
SKIP/ALL - Toggle between skipping frames (faster, useful for graphing/calculation) and rendering all (for games).
- SEND - Read section below.

Send Files to the TI-85

Method 1 Standard link emulation:

More likely to run out of RAM, but should be more compatible. Also this is required for apps with external levels.
From the home screen, click [2nd] [LINK] [F2]. The screen says Waiting and the busy indicator in top-right is spinning.
Tap SEND on the touchscreen. Use D-Pad to scroll through the files, and press A to send a file.
After it returns to the GUI, you can either:
- A - Send another file.
- B - Stop sending files (tap ON key a few times to stop transmitting).

Method 2 MagicLoad (TM):

Nice when it works. Similar to the archive on other TI models, it will load a game from your SD/CF card, run it, then save it back when it's done.
Make sure LOAD.85S is installed on your calculator, along with Usgard 1.5 (These are both pre-installed if you use the included save-state).
From the home screen, click [CUST] [F1].
- Use Arrows to select load on the list of apps (it may be the only one).
- Use ENTER or A to launch it. A file list will appear on the bottom screen.
- Use the D-Pad to scroll through the files, and press A to launch one.

Controls

D-Pad - Arrows

A - Enter

B - 2nd

X - F1

Y - Alpha

Start - Shows debug screen while held

Select - More

Start+Select - Reset (please be warned there is no confirmation, press ON after reset)

R - 2nd

L - Currently unused

Changelog

R3 2007/07/30

Fatlib updated with DLDI.

R2 2006/10/15

Added save and load state. Select between scaling modes.
Select frame-skipping. Select real or full speed.
Included a save-state file with some games loaded in it.

R1 2006/10/11

Initial public release.

External links

Author's website - http://blog.davr.org/category/nintendo-ds/ds85

@@ Line 1: / Line 1: @@
-{{Infobox homebrew
+{{Infobox DS Homebrews
-| title       = CalcEmu
+|title=DS85
-| image       = [[File:Ds85.jpg]]
+|image=Calcemuds852.jpg
-| type        = Mathematics
+|description=Also named DS85, TI-85 scientific calculator emulator.
-| version     = r3
+|author=davr
-| licence     = Mixed
+|lastupdated=2007/07/31
-| author      = Davr
+|type=Math
-| website     = http://blog.davr.org/category/nintendo-ds/ds85/
+|version=r3
-| download    = Media:Ds85r3.rar
+|license=Mixed
-| source      =
+|download=https://dlhb.gamebrew.org/dshomebrew2/calcemu_ds85_r3.rar
-}}
+|website=http://blog.davr.org/category/nintendo-ds/ds85
+}}
 DS85 R3 is a TI-85 Emulator for Nintendo DS. Original version by Milan Pikula. It requires a TI-85 rom to run.
 ==Installation==
-#Download and extract file
+'''Note:''' This application requires an authentic ROM image to run. The file should be named ti85.rom.
-#[http://chishm.drunkencoders.com/DLDI/ DLDI patch] .nds file  and copy it to the root directory of the card
-#Copy the ti85.rom to the root of your card(no subfolder) (This ROM cant be found with this app. Read below "To obtain a TI-85 rom")
+Download and extract file.
-#If you want additional features, you may want to copy ti85.sna to the root as well.
+[[DLDI|DLDI]] patch .nds file to the root directory of the card.
+Copy the ROM image that you obtained ti85.rom to the root of your card (no subfolder).
-It includes some ASM Games. After it has loaded, press Custom -> F1 to get to the gamemenu.
+If you want additional features, you may want to copy ti85.sna to the root as well.
-==User guide==
+It includes some ASM Games. After it has loaded, press Custom> F1 to get to the gamemenu.
-'''To obtain a TI-85 rom:'''
-Get a TI-85 calculator. Make or Get linking cable (serial or parallel should work)
-Download a rom dumper. Virtual TI (Windows) and TiLP (crossplatform) can both do this.
+'''Obtain a TI-85 rom:'''
-Follow instructions provided with rom dumper.(Optional) Use 'fixrom'. A few people have complained of corrupted ROM files, this tool will fix your problems. See the included README.fixrom
+Get a TI-85 calculator. Make or get linking cable (serial or parallel should work).
-'''GUI buttons'''
+Download a rom dumper. Virtual TI (Windows) and TiLP (crossplatform) can both do this.
-:SAVE: Save the current state to 'ti85.sna' on your CF/SD card
-:LOAD: Load the current state from 'ti85.sna' on your CF/SD card
-:RESET: Tap this to do a full reset of the calculator in case it crashes.
-:SIZE: Tap this to toggle scaling from proportional to stretched
-:REAL/FULL/freal: Tap this to switch between the emulation modes
-::REAL -- attempt to emulate at actual speed (This isn't quite perfect yet however)
-::FULL -- emulate as fast as possible
-::freal -- emulate at actual speed, unless doing processing, then run at full speed
-:SKIP/ALL: Tap this to toggle between skipping frames and rendering them all. It is slightly faster when skipping frames, useful for graphing/calculation, but games will probably want ALL.
-::SEND -- Read section below
-===Sending Files to the TI-85===
+Follow instructions provided with rom dumper.
-'''Method 1: Standard link emulation'''
-This is more cumbersome, and you have to worry about running out of RAM,
+Use fixrom if you experienced corrupted ROM files, see the included README.fixrom (optional).
-but should be more compatible. Also, this is required for apps with external
-levels.
-#From the home screen, click [2nd] [LINK] [F2]
+==User guide==
-#The screen says 'Waiting' and the busy indicator in top-right is spinning
+===GUI buttons===
-#Tap 'SEND' on the touchscreen
+* SAVE - Save current state to ti85.sna on your CF/SD card.
-#Use D-PAD to scroll through the files, and press A to send a file
+* LOAD - Load current state from ti85.sna on your CF/SD card.
-#After it returns to the GUI, you can either:
+* RESET - Do a full reset of the calculator in case it crashes.
-:A. Send another file (go to step 3)
+* SIZE - Toggle scaling from proportional to stretched.
-:B. Stop sending files (tap ON key a few times to stop transmitting)
+* REAL/FULL/freal - Switch between the emulation modes.
+** REAL - Attempt to emulate at actual speed (this isn't quite perfect yet however).
+** FULL - Emulate as fast as possible.
+** freal - Emulate at actual speed, unless doing processing, then run at full speed.
+* SKIP/ALL - Toggle between skipping frames (faster, useful for graphing/calculation) and rendering all (for games).
+** SEND - Read section below.
-'''Method 2: MagicLoad(TM)'''
+===Send Files to the TI-85===
+'''Method 1 Standard link emulation:'''
+* More likely to run out of RAM, but should be more compatible. Also this is required for apps with external levels.
+* From the home screen, click [2nd] [LINK] [F2]. The screen says Waiting and the busy indicator in top-right is spinning.
+* Tap SEND on the touchscreen. Use D-Pad to scroll through the files, and press A to send a file.
+* After it returns to the GUI, you can either:
+** A - Send another file.
+** B - Stop sending files (tap ON key a few times to stop transmitting).
-This is very nice when it works. It's similar to the 'archive' on other TI models, in that it will load a game from your SD/CF card, run it, then save it back when it's done.
+'''Method 2 MagicLoad (TM):'''
-#Make sure 'LOAD.85S' is install on your calculator, along with Usgard 1.5 (These are both pre-installed if you use the included save-state)
+* Nice when it works. Similar to the archive on other TI models, it will load a game from your SD/CF card, run it, then save it back when it's done.
-#From the home screen, click [CUST] [F1]
+* Make sure LOAD.85S is installed on your calculator, along with Usgard 1.5 (These are both pre-installed if you use the included save-state).
-#Use Arrows to select 'load' on the list of apps (it may be the only one)
+* From the home screen, click [CUST] [F1].
-#Use ENTER or A to launch it
+** Use Arrows to select load on the list of apps (it may be the only one).
-#A file list will appear on the bottom screen
+** Use ENTER or A to launch it. A file list will appear on the bottom screen.
-#Use the D-PAD to scroll through the files, and press A to launch one
+** Use the D-Pad to scroll through the files, and press A to launch one.
 ==Controls==
-D-PAD - arrows
+D-Pad - Arrows
-A - enter
+A - Enter
 B - 2nd
@@ Line 75: / Line 75: @@
 X - F1
-Y - alpha
+Y - Alpha
-Start - shows debug screen while held
+Start - Shows debug screen while held
-Select - more
+Select - More
-Start+Select - reset (warning! no confirmation! Press ON after reset.)
+Start+Select - Reset (please be warned there is no confirmation, press ON after reset)
 R - 2nd
-L - currently unused
+L - Currently unused
 ==Changelog==
-'''R1: Oct 11, 2006'''
+'''R3 2007/07/30'''
-*Initial public release.
+* Fatlib updated with [[DLDI|DLDI]].
-'''R2: Oct 15, 2006'''
+'''R2 2006/10/15'''
-*Added save and load state. Select between scaling modes.
+* Added save and load state. Select between scaling modes.
-*Select frame-skipping. Select real or full speed.
+* Select frame-skipping. Select real or full speed.
-*Included a save-state file with some games loaded in it.
+* Included a save-state file with some games loaded in it.
-'''R3: July 30, 2007'''
+'''R1 2006/10/11'''
-*Fatlib updated with DLDI
+* Initial public release.
-[[Category:Homebrew applications]]
+==External links==
+* Author's website - http://blog.davr.org/category/nintendo-ds/ds85