More actions
| vita-shellbat IRS 1001 | |
|---|---|
 | |
| General | |
| Author | leonardputra |
| Type | Plugins |
| Version | 0.1.0 |
| License | MIT License |
| Last Updated | 2023/12/28 |
| Links | |
| Download | |
| Website | |
| Source | |
If you've modded your Japanese "Sapphire Blue" or "Cosmic Red" PCH-1000 OLED Vita using the default HENkaku Ensō tutorial, you might have noticed a battery cap issue at 83%. This happens because the tutorial installs the shellbat.suprx taiHEN plugin, which is meant for the IRS-002 motherboard found in most OLED PSVitas.
The reason behind this 83% limit is that the charge controller on the IRS-1001 motherboard is set to stop charging at 4.05V, whereas the usual IRS-002 motherboard charges up to 4.2V. So, when the battery voltage hits 4.05V, the taiHEN API returns 83% as the battery life.
To address this, the original shellbat plugin was modified to adjust the displayed percentage from 0 to 83 to a full 0 to 100 range.
Note that this tweak only affects what you see on your screen; it doesn't change the actual charging cutoff voltage or your battery life. It's just for cosmetic purposes.
Note: Before using, make sure you have a brick protection (EmergencyMount or something similar). Use it at your own risk.
Installation
Copy the shellbat.suprx file to ux0:tai/shellbat.suprx.
Open ux0:tai/config.txt and add the plugin under the *main section:
*main ux0:tai/shellbat.suprx
Save the changes and reboot your Vita.
Screenshots
Compatibility
This plugin was only tested on the author’s own Vita (PCH-1000 Sapphire Blue).
Changelog
v1.0
- First Release.
Credits
Credits to https://github.com/nowrep/vita-shellbat (nowrep)