IR Remote Controller GB

iR Remote Controller
iR Remote Controller
General
Author	TeamKNOx
Type	Other Apps
Version	2000
License	MIT License
System	CGB
Last Updated	2000/08/06
Links
	Download
	Website
	Source

IR (InfraRed) Remote controller for GBC. See here to learn how it works.

User guide

PLAY tab

This is a Start Display. Use the finger-cursor to point at each button on the GBC display and press the A button on the GBC to generate a remote control signal.

The signal can reach approximately 2-3 meters depending on the receiver. There is usually no problem in a Japanese situation. If you press the B button on the GBC, encoded data will be generated.

REC tab

Allows for capturing signal. To learn the remote control signal, point finger-cursor to target button on GBC display and click A button of GBC and then transmit signal to window of GBC for Ir.

DUMP tab

Displays the learned signal with raw data. you press [Send to PC] with the A button of GBC, the transmission will be generated using 9600bps, None parity, and 1 Stopbit in Report format.

Pressing the B button will provide the C source list for GB-fREMe.

ENC tab

Displays encoded data. Also as same as DUMP mode, A button transmits encoded data. B button transmits GB-fREMe format with encoded data.

Report

Starting from Build20000318, you can generate signals from the Ir port of GBC, which saves time in creating reports.

Currently, "Ir tower" as LEGO MindStorms is used. To use this feature, start the terminal software on Windows, type any character in the terminal software (image shows 'a' key pressed), and then press the [Send to PC] button on GBC.

Also IrDA has been supported. You don't have to type any character, if you used in IrDA.