More actions
| 8BitVita | |
|---|---|
| File:8bitvita.jpg | |
| General | |
| Author | M Ibrahim |
| Type | Plugins |
| Version | 1.2 |
| License | Mixed |
| Last Updated | 2021/07/20 |
| Links | |
| Download | |
| Source | |
A plugin that allows you to connect an 8BitDo Pro 2 controller to the Vita.
Description
Basically just X1Vita but with 8bitdo vid, pid, & mappings.
Compatible 8bitdo controllers: Arcade Stick, Lite, Pro, Pro+, Pro 2, & Zero 2.
Enable the plugin:
- Add 8BitVita.skprx to taiHEN's config (ux0:/tai/config.txt) or (ur0:/tai/config.txt): <pre">*KERNEL ux0:tai/8BitVita.skprx
- You need to refresh the config.txt by rebooting or through VitaShell.
Using it for the first time (pairing the controller):
- Go to Settings -> Devices -> Bluetooth Devices
- Turn on the controller in x-input mode, typically
Start + Xon most 8bitdo models (Except the Arcade Stick, Lite, and Pro 2). - Put the controller into pairing mode by holding the
Selectbutton on most 8bitdo models (Unless it has a dedicated pairing button like the Arcade Stick, Lite, Pro, Pro+, and Pro 2), the led will blink rapidly or a pattern will begin flashing on the led's. - Select the controller name in the Bluetooth devices list, the controller will then connect and be paired (You may get a message saying "Do you want to connect?" press ok).
Using it once paired (see above):
- Just turn on the controller in x-input mode and it will connect to the Vita.
Media
Screenshot
Note
This plugin is compatible with minivitaTV ;) If you are using multiple controllers the controller ports will be set in the order you connect (if available), so first connection -> port 1 second connection -> port 2 (Maximum of two controllers can be used simultaneously).
Credit goes to M Ibrahim. Thanks to ShadowKnight1620 for testing.
Based on X1Vita & ds4vita.
Changelog
(v.1.2)
- Companion works again, fixed config file path. Now fully compatible with x1vita
(v.1.1)
- Fixes a bug when pressing L1
(v.1.0)
- Works properly now, tested on an 8bit pro 2, works with all 8bitdo's in X Input mode (as far as I know).
(v.0.1)
- First Release.