NX-FanControl Switch: Difference between revisions

NX-FanControl
NX-FanControl
General
Author	Zathawo
Type	Sysmodules
Version	1.0.1
License	MIT License
Last Updated	2024/09/02
Links
	Download
	Website
	Source

Revision as of 06:00, 16 September 2024

This sysmodule lets you control the fan speed based on the temperature of the Switch's SoC (using the tskin temperature).

With this overlay, you can adjust the fan curve and set it without rebooting the console.

Note: This is a work in progress so expect bugs.

Installation

Place the archive to your Switch's SD card.

Make sure you have nx-ovlloader and Tesla Menu installed.

Known issues

Currently, the sysmodule causes the Switch to reboot if other software that checks the fan speed is opened (like Status Monitor).

One of the method to avoid this is to add fan control to other software using the libfancontrol library.

Changelog

v1.0.1

Improved overlay stability.

v1.0

First Release.

External links

GitHub - https://github.com/Zathawo/NX-FanControl
GitHub - https://github.com/Zathawo/libfancontrol
GBAtemp - https://gbatemp.net/threads/nx-fancontrol.660285/

@@ Line 19: / Line 19: @@
 |image_alt=NX-FanControl
 }}
-NX-FanControl is a sysmodule that allows you to control the fan speed based on the SoC temperature (the Switch uses the tskin temperature). However, the sysmodule can cause the Switch to reboot if other software that checks fan speed, such as Status Monitor, is opened.
+This sysmodule lets you control the fan speed based on the temperature of the Switch's SoC (using the tskin temperature).
-To address this issue, the author created a library that easily integrates fan control logic into other software (a Status Monitor fork is currently a work in progress). With the overlay, you can adjust the fan curve and apply settings without rebooting the console.
+With this overlay, you can adjust the fan curve and set it without rebooting the console.
+'''Note:''' This is a work in progress so expect bugs.
+==Installation==
+Place the archive to your Switch's SD card.
+Make sure you have [[NX-ovlloader_Switch|nx-ovlloader]] and [[Tesla_Menu_Switch|Tesla Menu]] installed.
+==Known issues==
+Currently, the sysmodule causes the Switch to reboot if other software that checks the fan speed is opened (like Status Monitor).
+One of the method to avoid this is to add fan control to other software using the libfancontrol library.
 ==Changelog==
@@ Line 30: / Line 42: @@
 == External links ==
-* Gbatemp - https://gbatemp.net/threads/nx-fancontrol.660285/
+* GitHub - https://github.com/Zathawo/NX-FanControl
-* Github - https://github.com/Zathawo/NX-FanControl
+* GitHub - https://github.com/Zathawo/libfancontrol
-* Github - https://github.com/Zathawo/libfancontrol
+* GBAtemp - https://gbatemp.net/threads/nx-fancontrol.660285/