Edit Infobox Switch Homebrews: Argon-NX-SX-Mod Switch

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in one of the groups: Users, Administrators.

Title:
Image:	Upload file
Description:
Author(s):
Last Updated:
Contributor(s):
Ported by:
Type:
Version:
License:
Language(s):
Format:
Download:
Download Raw:
Website:
Source:
Discussion:
Donation:

Free text:

A mod for [[ArgonNX Switch|Argon-NX]] that lets you run alternative payloads and write/read from the micro SD card. This Argon-NX mod allows for the automatic creation of your SXOS license.dat, it also has a SXOS payload generator contained within the payload. This payload can be installed on any dongle that supports payload updates, or can be flashed onto a samd21 based modchip. It also include some ability to turn off/reboot/boot OFW to the menu's in Argon-NX. Those options were added so if you boot into RCM without a micro SD card you can boot to OFW/Shutdown easily from the menu. ==Installation== Payload creation: *Replace your license.dat with the one in the payload creation folder. *If you want to add your own serial, open b.hex with a hex editor (HXD), edit the highlighted MYSX-LICENCE serial (see the included picture) with your own sx license code. Save b.hex (don't change the byte size or edit anything apart from MYSX-LICENCE). *Click Join.bat to create your own custom argon-nx.bin. A new payload file will be created and will be unique to your device, and always have your own license embedded. You can flash this to a modchip (trinket mo/samd21 based chip) using binConverter.py and then using arduino ide to upload. If you have a dongle based on samd21 chips - you can flash in the same way you normally flash that. Reboot to argon: *Put generated argon-nx.bin into argon folder <code>/argon/argon-nx.bin</code> *Put reboot_to_argon-nx.nro into your <code>switch</code> folder. *Launch argon-nx like any other homebrew (press v+ during loading if you have autoboot.bin in your root directory). Note on icons: *Included is a photoshop file so you can make your own, the layout is 1 line with 4 icons (290x290 pixels). *If you need more, place extra payloads in a folder called payloads2. ==User guide== One the first run, the Argon-NX menu will appear - you can generate your autoboot.bin (SXOS payload) + license.dat from this menu. Also, if you installed the included SD files, you can load any of those payloads from that menu. On the second run - if you created autoboot.bin, the Switch will boot that automatically when you enter RCM mode. If you keep your finger on Volume Up - the Argon-NX menu will load instead. The ability to boot into OFW and Shutdown the Switch has also been added to the menu. If the Switch boots without a micro SD card - and you boot into RCM, you can choose to boot OFW/Shutdown or reload RCM mode. ===Interface=== Top arrow - next page if payloads2 dir exists. Icons (from left to right): *Battery - shows battery percentage, changes colours depending on charge level. Shows warning at 5%. *Screenshot. *Fuse - shows amount of fuses blown. *Gen SX payload as autoboot.bin if autoboot.bin doesn't exist. *Gen SX licence (if you add this yourself). *About. *Launch autoboot.bin (icon doesn't show if not present). *Launch ordinary firmware. *Power off. ==Screenshots== https://dlhb.gamebrew.org/switchhomebrews/argonnxsxmod.png ==Changelog== '''2019/04/24''' *Icons added instead of text, minor icon fixes - new background. *Also many fixes applied, and error checks added, auto centering of payload icons (if less than 4 - no longer goes to left of screen but centres properly), speed increase due to uneeded loop (thanks - JustBrandonT for fix). Auto timer shows text on screen for 5 seconds then text is removed. Updated graphics - and other stuff I probably forgot. '''2019/04/08''' *If a user had more than 4 payloads in the Argon payloads directory, icons would draw over each other - fixed. *Some other minor bug fixes/changes. *Extra menu added - if the user has more than 4 payloads, place extra payloads in Argon/payloads2 directory. *If you previously downloaded - download sd files again as these new graphics are included - you need default.bmp in the argon/logos folder as the payload reads the size from this file to generate icons. *NOTE: Boot to OFW does not work if you have AutoRCM enabled, it works without that enabled though - I've no idea why or how to fix it. == External links == * GBAtemp - https://gbatemp.net/threads/argon-nx-sx-mod.534886/

Summary:

Cancel