Toggle search
Toggle menu
10.3K
13.2K
1.2K
203.4K
GameBrew
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

NX Venom Switch

From GameBrew
More actions
Revision as of 03:01, 18 August 2024 by Hyatt (talk | contribs)
NX Venom
Nxvenomswitch.png
General
AuthorCatcherITGF
TypeSystem Tools
Version4.8.0
LicenseMixed
Last Updated2024/08/13
Links
Download
Website
Source

Switch overclocking suite for Nintendo Switch devices running Atmosphere CFW.

What's included:

Warning: Overclocking the console does not lead to irreversible consequences, however it poses a risk to data due to the features of Horizon OS. Therefore, it is strongly recommended to use overclocking exclusively in emuMMC and make backups. Use at your own risk.

Installation

Make backup and delete everything except "Nintendo" and "emuMMC" folders on the SD card.

Unpack the NX Venom to the root of the SD card. Use a card reader, or "Hekate" > "Tools" > "USB Tools".

Use the "All-in-One Switch Updater" homebrew application for updates.

Installation of additional software, as well as patches for games, is done through the "UberHand" menu (click right) > "Software Installer".

User guide

NX Venom usage.

Changelog

v4.8.0

  • Updated SwitchCraft to 1.3.7
    • The default max CPU frequency is now 1963 MHz when no UV is selected
    • GPU UV 2 fine tuning
      • The voltage at 1075 MHz has been slightly increased for higher speedos
  • Updated SC Wizard
    • New Micron WT:B timing presets
    • Updated presets with HP (high performance) timings

v4.7.2

  • Updated SwitchCraft
    • CPU max freq support
      • 1963 / 2379 / 2601 (Mariko)
      • 2091 / 2295 (Erista)
  • Updated SW Wizard
    • Compatibility
    • Refactoring
    • Updated Help

v4.7.1

  • Updated SwitchCraft to 1.3.5 (re-uploaded)
  • CPU voltage range has been expanded
      • 900 mv - 1235 mv
      • Updated SC Wizard
    • SC 1.3.5 compatibility

v4.7.0

  • Updated SwitchCraft to 1.3.5
    • Additional Auto DVB (SoC) voltage steps
    • Two negative DVB steps to reduce the SoC voltage for higher speedos (1633+ MHz)
    • The max CPU voltage limit can be increased to 1235 mV
  • Updated SC Wizard
    • SC 1.3.5 compatibility
  • Updated Status Monitor Overlay to 1.1.2

v4.6.7

  • Updated SaltyNX to 0.9.2
  • Updated Status Monitor Overlay to 1.1.1
  • Updated MemToolkitNX to 1.1.0
    • Exits only when pressing B
    • Dram volt reading
    • Dram id reading
    • RAM timing cfg reading (not working yet)

v4.6.6

  • Updated SC Wizard
    • Refactoring
    • Updated Help for all parameters (press Y inside menu)
    • Reduced GPU voltage range to 850
    • Fixed UV levels for Mariko
      • UV 1-8, High Freq UV 1-12
  • Updated Software Installer
    • Updated Help for all apps (press Y inside menu)

v4.6.5

  • Updated Switchcraft to 1.3.4
    • An additional DVB step
    • GPU UV 2 fine tuning (The voltage is now slightly reduced at 1267 MHz)
    • CPU high Freq UV 1-12

A good game to test CPU UV is “Need for Speed: Hot Pursuit”
It crashes in the main menu on the map if CPU UV is unstable

  • Updated SC Wizard
    • SC 1.3.4 compatibility
    • Timing presets (Samsung, Micron, Hynix)
      • Check your RAM type in the InfoNX overlay
      • After applying the preset, go back to the RAM section to refresh package
    • New default GPU UV3 tables
    • Lower tRAS values
    • RAM Vddq voltages has been extended
      • 370 - 700 mV
    • Small visual changes and bug fixes
  • Updated Software Installer
    • Added NX-Activity-Log app
    • Added TOTK UltraCam uberhand package

v4.6.4

  • Updated Switchcraft to 1.3.3.
    • Opportunity to lock/unlock CPU max clock.
      • 2601 (Mariko).
      • 2295 (Erista).
    • New RAM HP Mode.
      • It increases performance and bandwidth but also power and temperature.
    • RAM Vddq extended voltages.
      • 370 - 650 mV (Mariko).
    • AUTO_ADJ_HP was removed from DRAM Timings because of worse gaming performance
  • Updated SC Wizard.
    • SC 1.3.3 compatibility.
    • Extended Vdd2 voltages for Erista.
    • Refactoring.
  • Updated TegraExplorer to 4.2.0.
  • Updated Hekate v6.2.1 & Nyx v1.6.3.

v4.6.3

  • Updated SaltyNX & FPS Locker (forked).
    • OLED support.
  • Removed DisplayLocker.
  • Updated SC Wizard.
    • Fix bug with 2100 RAM freq on Mariko.

v4.6.2

v4.6.1

  • Updated Switchcraft to 1.3.2.
    • Auto GPU vmin improvements for lower speedos.
  • Updated Sys-Clk-OC to 8_0616.
    • Voltage bug and boost mode bug fixed.
  • Updated SC Wizard.
    • Added low freqs to RAM list (Mariko).
    • Added Venom default settings to Backup Manager.
    • SC 1.3.2 compatibility.
  • Updated Software Installer.
    • Added Fizeau.

v4.6.0

  • Updated SaltyNX to 0.7.5-beta2, FPSLocker 1.3.0-beta & Status-Monitor 1.0.3a.
    • Added display refresh rate feature (experimental).
      • SaltyNX now will restore display refresh rate after sleep mode if Display Sync is turned on and game is running (Otherwise it will be restored to 60 Hz after sleep mode).
      • Status Monitor overlay will update graph after sleep mode if refresh rate will be changed.
      • FPSLocker overlay only for LCD screens with range 40-60 Hz.
      • DisplayLocker overlay, the same as FPSLocker display sync feature, but with wider range for LCD (40-75 Hz) & OLED displays support (45-75 Hz).
  • Updated EdiZon overlay to v1.0.8.
  • Updated boot screen logo.
    • Display refresh rate feature allows you get smoothness picture in games at a lower FPS.
    • It works by the formula: less aggressive frequencies + more energy efficiency = the same quality as 60fps for a lower price.
    • It is not recommended to use values above 60 Hz, especially on OLED displays.
    • Most games support this, but not all.

v4.5.1

  • Updated Switchcraft to 1.3.1.
    • GPU auto vmin fine tuning for lower speedos.
  • Fixed issue #8.
    • Updated AMS system_settings.ini.
    • Added AMS hosts domains for EmuMMC only.
  • Fixed issue #9.
    • Updated Hekate to 1.6.2 v4.
  • Updated Sys-Patches to 1.5.2.

v4.5.0

  • Updated Atmosphère 1.7.1.
  • Updated hekate v6.2.0 & Nyx v1.6.2.
  • Updated Switchcraft to 1.3.0.
    • AMS 1.7.1 compatible.
    • GPU auto vmin fine tuning.
    • Small tuning changes in erista CPU UV4 should improve stability on some switches.
  • Updated SC Wizard.
    • SC 1.3.0 compatible.
    • GPU tweaks moved to Wizard.
    • GPU Scheduling & 1305 toggles separate now.
  • Udetated MGCL/MGCR 8GB patches.
  • Added sys-patch overlay to maintain sigpatches features.

Update:

  • UPD1. Hotfix for Hekate (blue screen on Erista).
  • UPD2. Hotfix for Hekate (v3 build).
  • UPD3. Hotfix for AMS (re-uploaded payload and fusee files).

v4.4.7

  • Updated OC Switchcraft 1.2.7.
    • AUTO_ADJ_LV is now split into two modes.
      • AUTO_ADJ_LV_HP: LV mode with slightly tighter timings.
    • Additional erista CPU UV tunings UV 1-5.
      • New UV1 = old UV1.
      • New UV5 = old UV3.
  • Updated SC Wizard.
    • Switchcraft 1.2.7 compatibility.

v4.4.6

  • Updated SC to 1.2.6.
    • AUTO_ADJ_2400 was renamed to AUTO_ADJ_LV; A DRAM mode with less tight timings; It can help to achieve higher frequencies or lower voltages.
    • Mariko perf with AUTO_ADJ_LV has been improved.
  • Updated SC Wizard.
    • SC 1.2.6 compatibility.

v4.4.5

  • Updated Switchcraft to 1.2.5.
    • New CPU UV 7 (UV6 high8 + voltage break at 1428 MHz).
    • Added an experimental DRAM timing option “AUTO_ADJ_2400” it can help to reach 2400 MHz on some bad binned switches.
  • Updated SC Wizard.
    • Mariko Cpu High Min Volt range has been expanded.
    • Fix bug with colors in Vdd2.
    • Added SC 1.2.5 compatibility.
  • Updated Sys-Clk-OC to 0525.
    • Voltage bug on erista is fixed.
  • Updated AMS config.
    • Disable dmnt_cheats_enabled_by_default.
  • Updated AIO config.
    • Unhide Firmwares tab.
    • Unhide Cheats tab.

v4.4.4

  • Updated Switchcraft to 1.2.4.
    • Sleep mode fix for CPU UV 1-3 (Erista).
  • Updated RAM patches for 8GB MGCL memory modules (not included to NX-Venom, only for modded consoles).
  • UPD: Fixed GPU Scheduling option.

v4.4.3

  • Update Sys-Clk to oc8 final3.
    • Reversenx sync now respects clock cappings.
    • Fixed issue of sys-clk not working on boot for some people.
    • Minor bug fixes and optimization.
    • Fixed auto cpu boost.
  • Updated OC Switchcraft to 1.2.3.
    • GPU UV2 revised, should improve the stability of some switches (Erista).
    • GPU auto vmin fine tuning, improved accuracy for some speedos (Mariko).

v4.4.2

  • Updated Switchcraft to 1.2.2 pre-release.
    • Erista GPU UV tables.
      • UV1 = Medel's GPU UV table with an offset of +30mV.
      • UV2 = Experimental dynamic high UV table.
      • UV3 = Static Custom Table.
  • Update SC Wizard.
    • Unset changed to Auto for GPU Vmin.

v4.4.1

  • Updated Switchcraft to 1.2.1 pre-release.
    • 1305 MHz is now only available if GPU Scheduling is ON (Mariko).
    • Added an additional DVB voltage step for (Erista).
    • CPU UV2&3 enables 2295 MHz (Erista).
  • Updated SC Wizard.
    • Switchcraft 1.2.1 support.
  • Updated System Tweaks.
    • Added GPU Scheduling option (default OFF).

v4.4.0

  • Updated Uberhand to 2.2.5.
  • GPU performance increased by ~5% for all frequencies.
  • Updated System Installer.
    • Progress bar for installation operations.
  • Updated System Tweaks.
    • Native toggles ON/OFF.
  • Updated SC Wizard.
    • Slider for Speedo.
    • Extended memory freqs range to 3000mhz for Mariko.
    • Extended CPU boost clock to 2601mhz for Mariko.
    • Fixed lags when moving between menus.
  • Updated Info-NX to 1.0.6 DEMILITARAIZED vers (created by Cooler3D).

Credits

Special thanks to meha, b0rd2dEAth, redraz, b3711, lineon, Ruslan, MasaGratoR, CtC, Efosamark, i3sey, Irene, khmm12, discord community NSwitch 60FPS Cheats & Mods and RetroNX for implementing individual components and help with this bundle.

Made with love by NX community, composed by Catcher in the grain field.

External links

Retrieved from ‘https://www.gamebrew.org/index.php?title=NX_Venom_Switch&oldid=184870’

Advertising: